How to measure body fat percentage: 6 methods compared
The six methods at a glance
| Method | Typical error | Cost | Where |
|---|---|---|---|
| Tape measure (US Navy) | 3 to 4 points | Free | Home |
| Skinfold calipers | 3 to 4 points | Low | Home or gym |
| Smart scale (bioimpedance) | 3 to 5 points or more | Low | Home |
| Air displacement (Bod Pod) | 2 to 3 points | Medium | Clinic or university |
| Underwater weighing | About 2 points | Medium | Lab |
| DEXA scan | 1 to 2 points | Higher | Clinic |
Error figures are approximate and depend on the equipment and the person taking the measurement.
1. Tape measure (US Navy method)
You measure your neck and waist, plus hips for women, and combine them with your height. It is free, quick and repeatable. Use the body fat percentage calculator to do the math. It is less reliable for very lean or very muscular people.
2. Skinfold calipers
Calipers pinch the fat under your skin at three to seven sites. In trained hands they are reasonably accurate. Results depend heavily on pinching the same spots the same way each time.
3. Smart scales
These send a small electrical current through your body and estimate fat from the resistance. Readings swing with hydration, meals and exercise. Use one at the same time each day and watch the trend, not the single number.
4. Bod Pod
You sit in a sealed chamber that measures how much air your body displaces. It is quick and comfortable, and more accurate than home methods.
5. Underwater weighing
You are weighed on land and again fully submerged. Fat floats and lean tissue sinks, so the difference gives your body density. It is accurate but awkward and hard to find.
6. DEXA scan
A low-dose X-ray scan separates fat, lean tissue and bone, and shows where fat is stored. It is the best option most people can book, usually for the price of a few gym sessions.
Which should you use?
For tracking progress, consistency beats precision. Pick one method, measure under the same conditions every two to four weeks and follow the change. A tape measure is enough for most people. If you want one accurate baseline, book a DEXA scan.
Getting consistent readings
- Measure in the morning, before eating or training.
- Take each measurement twice and average them.
- Compare results only within the same method.
Common questions
What is the most accurate way to measure body fat?
Among methods most people can access, a DEXA scan, typically within 1 to 2 percentage points.
How can I measure body fat at home?
Use a tape measure with the US Navy method, skinfold calipers or a smart scale. The tape method is free and the most repeatable.
Are smart scales accurate for body fat?
They are often off by 3 to 5 points or more and change with hydration. They are more useful for spotting a trend over weeks.
Get your own number
Open the body fat percentage calculator